Park 300 Brushless Outrunner Motor, 1380Kv
 

Key Features

• Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
• High-torque, direct-drive alternative to inrunner brushless motors
• Ideal for models requiring up to 85 watts of power
• Integrated prop saver design
• Mount, prop adapter and hardware included
• External rotor design with 3.2mm shaft
• Low noise level

Overview

Ideal for 3D models 6–9 oz (170–255 g), and sport and scale models 8–12 oz (225–340 g) or models requiring up to 85 watts of power.

Specs

• Type:Brushless outrunner
• Size:180/280 replacement
• Bearings or Bushings:Ball bearings
• Recommended Prop Range:6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
• Voltage:7.2–11.1V
• RPM/Volt (Kv):1380
• Resistance (Ri):.33 ohms
• Idle Current (Io):.40A @ 8V
• Continuous Current:7A
• Maximum Burst Current:9A (15 sec)
• Cells:6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
• Speed Control:8–10A brushless
• Weight:24 g (.8 oz)
• Overall Diameter:28mm (1.10 in)
• Shaft Diameter:3.17mm (1/8 in)
• Overall Length:22mm (.90 in)

Needed to Complete

8A–10A Brushless ESC

6–8 Ni-Cd/Ni-MH or 2–3S Li-Po

6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer